Punches for PG size holes with actuating screw
- For circular cut out in metal sheet and plastic.
- Operated with a wrench or ratchet/socket set.
- Fast, clean and burr-free cut out.
- For all diameters PG 7 to PG 48.
- Parts greased for better use.
- TIP: the round cut falls much easier when applying 2 or 3 additional turns with the tightening wrench after cutting out.
- Supplied with punc, die, and ball stop screw. Table caption: - d = PG diameter/mm. - d1 = drilling diameter/mm. - Screw = dimension on flat (mm)/ operating screw. - E = max/thickness steel/soft.
References
| Diameter [mm] | Diameter D1 [mm] | Thickness E [mm] | Screw Size Multi [mm] | Weight [g] |
---|
985968 | 12.7 | 11.0 | 2.0 | 17.0 | 108.0 |
985969 | 15.2 | 11.0 | 2.0 | 17.0 | 114.0 |
985972 | 18.6 | 11.0 | 2.0 | 17.0 | 120.0 |
985974 | 20.4 | 11.0 | 2.0 | 17.0 | 120.0 |
985978 | 22.5 | 11.0 | 2.0 | 17.0 | 128.0 |